Bidet Attachment Toilet Fit Information
The PureSpa and FreshSpa lines of bidet attachments fit nearly all standard Round and Elongated toilet bowls, including most one-piece and curved toilet fixtures (commonly referred to as French Curve). Refer to the fit diagram below for exact specifications for fitting the bidet attachment to your fixture.
Bolt holes must be between 5-1/4 inches and 8 inches apart. You will also need at least 3/4 inch clearance from the center of the bolt holes to the back of the toilet tank.
Fixtures with Curved Tanks (French Curve Fixtures)
- Measure 2-1/4 inches in a straight line from the center of either bolt hole to the edge of the toilet fixture (shown as A in the diagram below).
- Measure from Point A (established in the step above) towards the toilet tank. You will need at least 3/4" of clearance (shown as B in the diagram below) in order for the PureSpa or FreshSpa to fit on your toilet.